Impact Testing Machines
Impact tests are
designed to measure the resistance to failure of a material to a suddenly
applied force. The test measures the impact energy, or the energy absorbed
prior to fracture. The most common methods of measuring impact energy are the:
Charpy ImpavtTest:
Izod ImpactTest:
Charpy Impact Test
The Charpy test
piece rests on alloy steel supports anvils, fitted on the base of the machine
rigidly held in position by alien screws. End stopper is provided for quickly
& accurately locating the test piece centrally between the supports.
Izod Impact Test
The Izod test
piece is clamped vertically in Izod support anvils, fitted on the base of the
machine. The support is provided with a machined vertical groove to suit the
test piece size. The front clamp piece & alien screw enable clamping of the
test piece in correct height with the help of Izod setting gauge supplied.
Instrumented Impact Test
Most of the test machines can be provided with strain gage or
accelerometer instrumentation. Instrumented test systems enable
measurement of the force applied to the test specimen during an impact
event. Then, the instrumented test data can be used to calculate the energy absorbed
by the test specimen. In addition, the crack initiation and arrest loads
can be used in fracture mechanics models.
Pendulum Impact Test
The Pendulum Impact Tester is designed for
conduction Izod & Charpy Test.
the Pendulum swing down to break the specimen
and the energy absorbed in doing so is measured as the difference between the
height of drop before rupture & height of raise after rapture of the test
specimen and is read from the maximum pointer on the dial scale
The Pendulum supported in the starting
positions is by a self resetting latch. The release mechanism is operated by
lever. The Pendulum release latch is operated only when this lever is operated.
For more information click here
No comments:
Post a Comment